Description

CFWT210S187 – 450L Slimline Water Tank

The 450L Slimline tank’s dimensions are tailored for easy doorway access, making it perfect for rural waterline applications. Crafted in Western Canada from FDA-approved polyethylene, this product stands out for its exceptional quality and durability, enhanced by UV stabilizers.

Volume:

454 liters, 120 US gallons, 100 IMP gallons

Measurements:

Height – 48inches(1219mm) x Diameter – 29inches(737mm)

Standard Features:

• 8″ Lid
  1″ Bulkhead
  Fits through standard door way
  FDA approved food grade plastic
  UV20 Stabilizer protection

Optional Features:

•  extra bulkheads

10 Year Warranty!

Installation Requirements

Foundation Preparation

A properly prepared foundation is essential to support the tank safely when full.

Recommended Base

• Install the tank on a solid, level, and fully supported foundation.
• Suitable foundation options include:
  • Reinforced concrete pad
  • Compacted crushed gravel topped with a concrete paver
  • Engineered tank stand designed for the tank’s capacity
• The entire base of the tank must be uniformly supported to prevent distortion.
• The foundation should be capable of supporting the combined weight of the tank and stored water.

Avoid

• Uneven or sloping surfaces
• Loose soil or uncompacted gravel
• Wooden pallets
• Individual bricks or concrete blocks used as supports
• Areas prone to erosion or ground settlement

Tank Positioning

The slimline design allows the tank to pass through standard doorways, making it ideal for installations with restricted access.

Positioning Recommendations

• Install the tank in a vertical orientation only.
• Position the tank on a level surface.
• Ensure adequate clearance around the tank for plumbing connections and future maintenance.
• Place the access lid where it can be easily opened for inspection and cleaning.
• If installed outdoors, position the tank where water can drain freely away from the foundation.

Suitable installation locations include:

• Residential properties
• Rural water systems
• Garages and utility rooms
• Workshops
• Agricultural buildings
• Rainwater harvesting systems

Inlet Connection

Connect the inlet pipe using plumbing appropriate for the intended application.

Best Practices

• Support all external pipework independently to prevent stress on the tank.
• Use compatible fittings and thread sealant where appropriate.
• Avoid overtightening threaded connections.
• Install isolation valves where future maintenance may be required.
• If collecting rainwater, install a leaf screen or pre-filter upstream to reduce debris entering the tank.

Outlet Connection

The tank is supplied with one 1-inch bulkhead fitting.

Installation Recommendations

• Connect compatible 1-inch plumbing to the bulkhead fitting.
• Use potable-water-approved fittings if the tank is used for drinking water storage.
• Support downstream piping independently of the tank.
• Install a shut-off valve near the outlet to simplify servicing and maintenance.
• After filling the tank, inspect the bulkhead fitting and connections for leaks.

Overflow Installation

Although an overflow fitting is not included as a standard feature, an overflow connection is recommended where applicable.

Overflow Best Practices

• Route overflow water away from building foundations.
• Discharge overflow to:
  • Stormwater drainage
  • Soakaway or infiltration system
  • Approved drainage location
• Ensure the overflow remains free from obstructions.
• Fit an insect screen where appropriate to prevent pests from entering the system.

Maintenance Access

Provide sufficient space around the tank to allow routine inspection and servicing.

Recommended Minimum Clearances

Adequate access allows for:

• Interior cleaning
• Lid removal
• Plumbing inspection
• Bulkhead servicing
• Leak detection

Safety Recommendations

For safe installation and operation:

• Install only on a stable, level foundation.
• Never allow attached pipework to support the weight of the tank.
• Do not climb, stand, or place heavy loads on the tank.
• Protect the tank from vehicle impact or other mechanical damage.
• Keep the access lid securely closed when the tank is not being serviced.
• Follow all applicable local plumbing and building codes.
• When storing potable water, maintain appropriate sanitary practices to preserve water quality.

General Installation Best Practices

• Inspect the tank for shipping damage before installation.
• Confirm the foundation is level before positioning the tank.
• Verify that all fittings are secure before filling.
• Fill the tank gradually while checking all plumbing connections for leaks.
• Periodically inspect the tank, fittings, and support surface for signs of wear or movement.
• Clean the tank as needed based on water quality and intended use.
• If optional bulkheads are installed, ensure they are properly sealed and tested for leaks before the system is placed into service.

Routine Maintenance

Installation Summary

CFWT210S187