Below Ground Potable System, 6000 USG, 4 X 1500 USG Design

Below Ground Potable System, 4×1500 USG Design

This below ground potable system is designed to meet Canadian plumbing codes and CSA standards for Rainwater Harvesting CSA B805. The overall system design employs a multi-barrier approach to water quality, with the first step being the pre-filter, followed by the rainwater tank design, and finally, the water treatment system. Cleanflo Systems are designed from “roof to tap,” with attention to every detail of your rainwater harvesting system. When you purchase the complete system from Rainwater Collection Supply, it is part of a comprehensive package that includes support for the life of the system via Email.

This below ground potable rainwater harvesting system is intended as a primary source of water for potable purposes, such as drinking, cooking, bathing, toilets, and laundry. Additionally, it provides a backup water source from hauled bulk potable water if the rainwater tank is empty. The system is designed to provide water for water uses Tier: R4 – Potable Domestic.

Category: Tags: , , ,

Original price was: $150.00.Current price is: $0.00.

Description

Our FREE Below Ground Potable System 6000 USG, 4 X 1500 USG Design

This below ground potable rainwater harvesting system is intended as a primary source of water for potable purposes, such as drinking, cooking, bathing, toilets, and laundry. Additionally, it provides a backup water source from hauled bulk potable water if the rainwater tank is empty. The system is designed to provide water for water uses Tier: R4 – Potable Domestic.

Roof

The below ground potable system will be harvesting rain from one building with an asphalt roof. When using the rainwater for potable water, the roof should be NSF P151 approved or coated with a NSF P151 approved coating.

Gutter, Downpipes, and Conveyance Piping

The gutters, downpipes, and conveyance piping are sized based on specifications from the designs. When using the rainwater for potable water, the gutter, downpipe, and conveyance piping should be NSF P151 approved or coated with a NSF P151 approved coating.

Pre-Filter

The system will require two (2) pre-filters. These pre-filters operate as both a first flush diverter and prefilter, with a filter mesh size of 320 microns. The full cross-section (pipe diameter) of the rainwater drainage system remains continuously open, and there are no reductions in the cross-section of this appliance in which dirt or water can collect.

Rainwater Tank / Cistern

This below ground potable system will provide a total of 6000 USG of rainwater storage, with a total of four (4) below-ground tanks, made of polyethylene. Each tank is 1500 USG. The rainwater tank is designed to provide safe storage of rainwater, which improves water quality due to its design and function. The calming inlet prevents agitation of settled fine dust, the skimming overflow removes floating particles, and the floating filter ensures water is drawn into the pump from approximately 150 mm (6.0″) below the surface of the water.

Water Pumping and Treatment System

Cleanflo determined the water demand to be 8 GPM @ 60 PSI. This will be pumped by a multi-stage booster pump powered by VFD. The treatment will be three stages to ensure water is safe to use. Stage one is a sediment filter of 15 microns, which provides a self-cleaning flush to drain. Stage two is a 10 carbon filter. Stage three is a 1 micron sediment filter. Stage four is an ultraviolet sanitation system NSF 55 Class A.

Water Quality and Treatment

Cleanflo designed this system to produce water that is safe for CSA B805 R4 uses; namely, potable domestic.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products